Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of RADIFLAM AESTUS T2 RV300 HF 100 NT - PA6T/66-GF30 - RadiciGroup High Performance Polymers

Check here, which other Radiflam A datasheets, application examples or technical articles are available in Material Data Center

Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses - Fonctions

Any use of this information falls under the rules of our disclaimer.

Informations produit

PPA flame retardant injection moulding grade, 30% glass fibre reinforced. Halogen and red phosphorus free. High melting point. Natural colour.

Suitable for parts requiring fire retardancy along with high stiffness and good mechanical resistance. Suitable for Lead Free Soldering application. Rated V0 according to UL94.

Caractéristiques des transformations/physiques	sec / cond	Unité	Norme du test
ISO Data
Retrait au moulage, parallèle	0.4 / *	%	ISO 294-4, 2577
Retrait au moulage, perpendiculaire	0.9 / *	%	ISO 294-4, 2577

Propriétés mécaniques	sec / cond	Unité	Norme du test
ISO Data
Module en traction	10900 / 11000	MPa	ISO 527
Contrainte à la rupture	160 / 135	MPa	ISO 527
Déformation à la rupture	2.4 / 2.2	%	ISO 527
Résistance au choc Charpy, +23°C	55 / -	kJ/m²	ISO 179/1eU
Résistance au choc Charpy, -30°C	50 / -	kJ/m²	ISO 179/1eU
Résistance au choc Charpy (entaillé), +23°C	10 / 11	kJ/m²	ISO 179/1eA

Propriétés thermiques	sec / cond	Unité	Norme du test
ISO Data
Température de fusion, 10°C/min	305 / *	°C	ISO 11357-1/-3
Température de fléchissement s/chrg, 1.80 MPa	280 / *	°C	ISO 75-1/-2
Inflammabilité ep. nom. 1.5 mm	V-0 / *	class	IEC 60695-11-10
Epaisseur de l'éprouvette	0.4 / *	mm	-
Yellow Card disponible	oui / *	-	-
Inflammabilité pr. épaisseur h	V-0 / *	class	IEC 60695-11-10
Epaisseur de l'éprouvette	1.5 / *	mm	-
Yellow Card disponible	oui / *	-	-
Inflammabilité 5V pr. épaisseur h	5VA / *	class	IEC 60695-11-20
Epaisseur de l'éprouvette	1.5 / *	mm	-
Yellow Card disponible	oui / *	-	-

Propriétés électriques	sec / cond	Unité	Norme du test
ISO Data
Résistivité transversale	1E13 / -	Ohm*m	IEC 62631-3-1
Rigidité diélectrique	42 / 44	kV/mm	IEC 60243-1
Indice de résistance au cheminement	600 / -	-	IEC 60112

Propriétés diverses	sec / cond	Unité	Norme du test
Absorption d'humidité	1.3 / *	%	Sim. to ISO 62
Masse volumique	1460 / -	kg/m³	ISO 1183

Fonctions

Caractéristiques

Transformation

Moulage par injection

Conditionnement

Grains, Couleurs naturelles

Additifs

Agent de démoulage

Propriétés spéciales

Ignifugé, Sans halogène, Sans phosphore, Stabilisé à la chaleur

Disponibilité régionale

Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique

Autres informations

Moulages par injection

The material is delivered in moisture-proof packaging ready for processing. Maximum recommended water content for best processing is 0.10%. Typical conditions with a desiccant drier: temperature 120° C, dew point -20 ° C or below, time 4 h or more. Avoid excessive shear rates and high thermal stresses for better processing. Special care must be taken to avoid moisture absorption and contamination with other polymers when adding regrind material. Colour variation and mechanical properties reduction may occur and should always be carefully monitored.

Injection Molding Processing Parameters

Melt Temperature	Mold Temperature	Injection Speed
310 - 320°C	110 - 130°C	medium

Conditions générales

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.